123 Hp Printer Setup | Easy Steps To Perform

HP Deskjet Printer is a great device for printing high-quality prints at a very low price. To set up your printer for the first time make sure that you correctly install it by following the given instructions. The products and accessories that are shipped along with the printer may vary by region. Compare the listed items in the package and the items available with the printer. You can download the HP Deskjet Printer’s driver from the “123 Hp Printer Setup” website.

HP Deskjet Printers Remove the Printer from the box

Initially, you have to remove the HP Deskjet printer from the box by unpacking it and removing all the packing materials that are used. Check thoroughly before proceeding to the next step.

• Unboxing the HP Deskjet Printers to start the installation and setup
• The packing materials like tapes, stickers, and cardboard should be removed from the outside of the printer.
• To remove the packing materials inside the printer you have to open the scanner lid
• Remove all the packing materials from the b (both inside and outside the printer)
• Check whether you have removed all the packing materials from the printer for easy installation
• The cardboard box inside the printer consists of ink cartridges, a power cord, and a USB cable. Remove the contents before sending them to the recycling
• All the packing materials that are removed from the printer should be sent to the recycling department.

123 HP Deskjet Printers power cord connections

The power cord should be connected for proper installation of the printer. The power source is very important for the printer and to continue to other steps

• Turn the 123 hp com printer and face the rear of the printer to plug the power cord.
• The other end of the power cord should be plugged into an electrical outlet which acts as the power source for the printer.
• You will notice the power button present at the top of the printer. Click the power button to switch on the printer and proceed to the next step.